DSE6020 MKII – Auto Mains (Utility) Failure Control Module, 24V DC
| Voltage |
24V DC
|
| Brand |
Deep Sea Electronics
|
| Continuous Voltage Rating |
8-35 V
|
| Maximum Operating Current |
100 mA at 12 V, 105 mA at 24 V
|
| Frequency |
3.5-75 Hz
|
| Dimensions |
216 mm x 158 mm x 43 mm (8.5″ x 6.2″ x 1.5″)
|
| Panel Cutout Dimensions |
184 mm x 137 mm (7.2″ x 5.3″)
|
| Maximum Panel Thickness |
8.0 mm (0.3″)
|
| Operating Temperature Range |
-30 DegreeC to +70 DegreeC (-22 DegreeF to +158 DegreeF)
|
| Storage Temperature Range |
-40 DegreeC to +85 DegreeC (-40 DegreeF to +185 DegreeF)
|
| Degree of Protection |
IP65 (when installed with optional sealing gasket)
|
12,000.00৳ 15,000.00৳
The DSE 6020 MKII is an Auto Mains (Utility) Failure Control Module developed to provide a wide range of operating and monitoring features for single diesel and gas gen-sets.
KEY FEATURES
• Support for 0-10 V & 4-20mA oil pressure senders.
• Large back-lit icon LCD display.
• Heated display option.
• 3-phase generator sensing.
• 3-phase generator and mains (utility) sensing.
• Breaker control buttons on front fascia.
• Generator & load power monitoring (kW, kV A, kV Ar, pf).
• Generator overload protection (kW).
• Generator/load current monitoring & protection.
• Configurable analogue/digital inputs.
• Configurable DC, volt-free and staged loading outputs.
• CAN, MPU & alternator speed sensing (selectable depending on engine type).
• Tier 4 CAN engine support.
• Configurable event log (50).
• DSE Configuration Suite PC Software.
• Fuel and start outputs (configurable on CAN).
●With monitoring and protection of all generator sets ●The supported engine is equipped with an electronic control unit interface
●Automatic or manual start/simple control button of the generator set above
Based on 0 reviews
Be the first to review “DSE6020 MKII – Auto Mains (Utility) Failure Control Module, 24V DC”
Related products
-
Controller Modules
Dse 5110 Auto Generator LCD Indication Genset Controller
Controll Funtion Protection Funtion Data display Auto-test Commercial power Low-Lubrition Oil Battery Voltage Emergence Stop Charging failure Oil pressure Manual Start/STOP Over Voltage,Over load Operation Time Long-Distance Start/Stop High water temperature Frequency Auto quit of Start motor Over frequency Voltage Double power swicth transfer controll Low Frequency Amper Stop Failure Water Temperature Start Failure Speed SKU: n/a -
-
Controller Modules
Dse7320 Mkii Deep Sea Electronics Controller System for Generators
Key Benefits
• Automatically transfers between mains (utility) and generator (DSE7320 MKll only) for convenience.
• Hours counter provides accurate information for monitoring and maintenance periods
• User-friendly set-up and button layout for ease of use
• Multiple parameters are monitored & displayed simultaneously for full visibility
• The module can be configured to suit a wide range of applications for user flexibility
• PLC editor allows user configurable functions to meet user specific application requirements.SKU: n/a -
Controller Modules
MeBay DC42D MK3 Generator Set Controller Module Diesel
Summary
This series controller is specialized for Diesel / Gasoline / Gas Genset Start, Stop, Parameters monitoring, faults-checking as well as data setting. 3.0 inch LCD screen display with brand new UI design is adapted in this controller that the relative failures can be displayed directly. All the parameters can be displayed by simulated indicators and words. Besides, LCD screen can display various faults in the same time that the genset will be stopped once it can’t work smoothly. There are Chinese/English interface options, more language can be set according to user’s request. All the parameters can be configured through the front face buttons or use programmable interface by RS485 or USB to adjust via PC. It can be widely applied for all kinds of auto control system of gensets.
SKU: n/a
There are no reviews yet.