Dse 5110 Auto Generator LCD Indication Genset Controller
| Controll Funtion | Protection Funtion | Data display |
| Auto-test Commercial power | Low-Lubrition Oil | Battery Voltage |
| Emergence Stop | Charging failure | Oil pressure |
| Manual Start/STOP | Over Voltage,Over load | Operation Time |
| Long-Distance Start/Stop | High water temperature | Frequency |
| Auto quit of Start motor | Over frequency | Voltage |
| Double power swicth transfer controll | Low Frequency | Amper |
| Stop Failure | Water Temperature | |
| Start Failure | Speed |
12,000.00৳ 15,000.00৳
DSE5110 Auto Start Control Module | Deep Sea Electronics
The DSE5110 Automatic Start Control Module is crafted to initiate and halt diesel and gas generating sets featuring non-electronic engines automatically. With robust engine monitoring and protective capabilities, it offers comprehensive oversight, detecting under speed, over speed, charge failure, emergency stops, low oil pressure, high engine temperature, failure to start or stop, and loss of speed sensing signal. Fault conditions are conveniently displayed on the LCD and LED indicators at the module’s front
Based on 0 reviews
Be the first to review “Dse 5110 Auto Generator LCD Indication Genset Controller”
Related products
-
Controller Modules
Mebay DC70D Amf Auto Start Diesel Generator Controller
Main Features
- Standard CAN communication port, built-in J1939 protocol, has matched more than 30 kinds of engines;
- Various kinds of parameters display.
- Input/output function, status can be shown directly.
- More categories of surface setting.
- Real time clock inside: preset time operate and auto maintenance is available. Genset working plan can be set as per week or month.
- Three class protection countdown function, which can set the maintenance time or date.
- The black box function can save the relevant parameters of the unit when the fault alarm occurs in real time, and it is convenient to find the cause of the fault.
- Totally 7relay’s output, among which 5 relay output can be self-configurable, each relay can be set as max 50 functions, besides, there are 4 groups as non-contact terminals.
- With 5 switchesinput, up to 40 functions optional;
- 4sensor simulation input connectors, the oil pressure sensor is compatible with voltage signal input, and various display units can be configured.
- Battery charging control function,which can protect the battery according to battery voltage status.
- Sensor can be self-defined by front face button or PC software.
- Adapt to 3P4W,1P2W,2P3W(120V/240V,50/60HZ)
- Various of crank conditions (RPM, Frequency, Oil Pressure) can be chosen.
- Control Protection: Auto Start/Stop of genset, load transfer (ATS control) and perfect failure display and protection.
- Standard water-proof rubber gasket. The waterproof can reach IP54
SKU: n/a -
Controller Modules
InteliLite NT AMF 20 Comap Automatic Mains Failure
The InteliLite 4 AMF 20 stands out as a sophisticated single gen-set controller crafted for stand-by and prime power applications. With its user-friendly, flexible, and straightforward design, this controller ensures ease of installation and operation. Explore a range of configuration options to tailor the perfect solution for efficiently managing and monitoring your generator sets, whether on-site or remotely.
- Easy configuration with InteliConfig
- Remote monitoring
- Cybersecurity by design
- Easy troubleshooting
- Built-in PLC logic
SKU: n/a -
Controller Modules
DSE8610 MKII – Auto Start Load Share Control Module
Brand Deep Sea ElectronicsOperating Temperature -30 DegreeC to +70 DegreeC (-22 DegreeF to +158 DegreeF)Degree Of Protection IP65 (when installed with supplied sealing gasket)Continuous Voltage Rating 8-35 VMaximum Operating Current 375 mA at 12 V, 200 mA at 24 VFrequency Range 3.5-75 HzDimensions 245 mm x 184 mm x 51 mm (9.6″ x 7.2″ x 2.0″)Maximum Panel Thickness 8.0 mm (0.3″)Storage Temperature Range -40 DegreeC to +85 DegreeC (-40 DegreeF to +185 DegreeF)SKU: n/a -
Controller Modules
MeBay DC42D MK3 Generator Set Controller Module Diesel
Summary
This series controller is specialized for Diesel / Gasoline / Gas Genset Start, Stop, Parameters monitoring, faults-checking as well as data setting. 3.0 inch LCD screen display with brand new UI design is adapted in this controller that the relative failures can be displayed directly. All the parameters can be displayed by simulated indicators and words. Besides, LCD screen can display various faults in the same time that the genset will be stopped once it can’t work smoothly. There are Chinese/English interface options, more language can be set according to user’s request. All the parameters can be configured through the front face buttons or use programmable interface by RS485 or USB to adjust via PC. It can be widely applied for all kinds of auto control system of gensets.
SKU: n/a
There are no reviews yet.