| Voltage |
24V DC
|
| Brand |
Deep Sea Electronics
|
| Continuous Voltage Rating |
8-35 V
|
| Maximum Operating Current |
100 mA at 12 V, 105 mA at 24 V
|
| Frequency |
3.5-75 Hz
|
| Dimensions |
216 mm x 158 mm x 43 mm (8.5″ x 6.2″ x 1.5″)
|
| Panel Cutout Dimensions |
184 mm x 137 mm (7.2″ x 5.3″)
|
| Maximum Panel Thickness |
8.0 mm (0.3″)
|
| Operating Temperature Range |
-30 DegreeC to +70 DegreeC (-22 DegreeF to +158 DegreeF)
|
| Storage Temperature Range |
-40 DegreeC to +85 DegreeC (-40 DegreeF to +185 DegreeF)
|
| Degree of Protection |
IP65 (when installed with optional sealing gasket)
|
14,000.00৳ 15,000.00৳
The DSE 6020 MKII is an Auto Mains (Utility) Failure Control Module developed to provide a wide range of operating and monitoring features for single diesel and gas gen-sets.
KEY FEATURES
• Support for 0-10 V & 4-20mA oil pressure senders.
• Large back-lit icon LCD display.
• Heated display option.
• 3-phase generator sensing.
• 3-phase generator and mains (utility) sensing.
• Breaker control buttons on front fascia.
• Generator & load power monitoring (kW, kV A, kV Ar, pf).
• Generator overload protection (kW).
• Generator/load current monitoring & protection.
• Configurable analogue/digital inputs.
• Configurable DC, volt-free and staged loading outputs.
• CAN, MPU & alternator speed sensing (selectable depending on engine type).
• Tier 4 CAN engine support.
• Configurable event log (50).
• DSE Configuration Suite PC Software.
• Fuel and start outputs (configurable on CAN).
●With monitoring and protection of all generator sets ●The supported engine is equipped with an electronic control unit interface
●Automatic or manual start/simple control button of the generator set above
Summary
This series controller is specialized for Diesel / Gasoline / Gas Genset Start, Stop, Parameters monitoring, faults-checking as well as data setting. 3.5 inch LCD screen display with brand new UI design is adapted in this controller that the relative failures can be displayed directly. All the parameters can be displayed by simulated indicators and words. Besides, LCD screen can display various faults in the same time that the genset will be stopped once it can’t work smoothly. There are Chinese/English interface options, more language can be set according to user’s request. All the parameters can be configured through the front face buttons or use programmable interface by RS485 or USB to adjust via PC. It can be widely applied for all kinds of auto control system of gensets.
| Phase |
Single Phase
|
| Automation Grade |
Automatic
|
| Brand |
ComAp
|
| Body Material |
CRCA
|
| Model Name |
InteliGen4 200
|
| E-Stop Fusing |
10 Amp
|
| Protection Degree |
IP 65
|
| Max. Output Current |
250 mA
|
| Accuracy |
1 %
|
| Resolution |
132 x 64 px
|
| USB Device |
Non-isolated type B connector
|
| USB Host |
Non-isolated type A connector
|
| Operating Temperature Range |
-20 DegreeC to +70 DegreeC
|
Main Features
Benefits:
Reflective Safety Vest 
Protective Safety Goggles 
PU Foam Safety industrial Ear Plug, For Noise Reduction 
Dse7320 Mkii Deep Sea Electronics Controller System for Generators 
There are no reviews yet.