Genuine and Brand New Volvo Engine Control Module Ecm, ECU
Volvo Penta ECU (Engine Control Unit) is an important part of the generator engine using diesel. To make it easier to understand and visualize, you can understand that the ECU is the black box part, which is like a “brain” that can receive information, control, and record the activities of the generator engine.
Today, modern society is developing more and more, the demand for good and optimal engine selection is also increasing, leading to many brands being born. However, to achieve the most performance and stability in the manufacturing process, ECU engines usually dominate. Volvo Penta ECU is one of the oldest and best brands in the world in the field of industrial engine production.
Mebay DC30D Newly Porduced Engine Controller Generator Controller
Summary
This Controller Series is specialized for small diesel, gasoline, gas generator sets’start, stop,monitor and defaults checking as well as parameters setting. The controller has a point array LCD screen, can display various faults in the same time that the genset will be stopped once it can not work smoothly. There are Chinese/English interface options, more language can be set according to user’s request. All the parameters can be configured through the front face buttons or use programmable interface by USB to adjust via PC. It can be widely applied for all kinds of auto control system of gensets.
MeBay DC42D MK3 Generator Set Controller Module Diesel
Summary
This series controller is specialized for Diesel / Gasoline / Gas Genset Start, Stop, Parameters monitoring, faults-checking as well as data setting. 3.0 inch LCD screen display with brand new UI design is adapted in this controller that the relative failures can be displayed directly. All the parameters can be displayed by simulated indicators and words. Besides, LCD screen can display various faults in the same time that the genset will be stopped once it can’t work smoothly. There are Chinese/English interface options, more language can be set according to user’s request. All the parameters can be configured through the front face buttons or use programmable interface by RS485 or USB to adjust via PC. It can be widely applied for all kinds of auto control system of gensets.
Meybay DC50D MK3 Genset Controllers for Generator
Summary
This series controller is specialized for Diesel / Gasoline / Gas Genset Start, Stop, Parameters monitoring, faults-checking as well as data setting. 3.5 inch LCD screen display with brand new UI design is adapted in this controller that the relative failures can be displayed directly. All the parameters can be displayed by simulated indicators and words. Besides, LCD screen can display various faults in the same time that the genset will be stopped once it can’t work smoothly. There are Chinese/English interface options, more language can be set according to user’s request. All the parameters can be configured through the front face buttons or use programmable interface by RS485 or USB to adjust via PC. It can be widely applied for all kinds of auto control system of gensets.
Mebay DC70D Amf Auto Start Diesel Generator Controller
Main Features
Mebay DC72D Amf Auto Start Diesel Generator Controller
Main Features
Mebay Generator Controller DC90d Auto Control Module
Mebay Generator Controller DC92D Genset Control Module With CAN Port J1939 Protocol
Mebay Generator Controller DC92D Genset Control Module With CAN Port J1939 Protocol
3. USB Port and Standard CAN communication port, built-in J1939 protocol, has matched more than 30 kinds of engines
4. Real time clock inside, Three class protection countdown function, and the black box function
InteliLite 4 AMF 8 Single Gen-Set Controller
Key features include:
Discover a new level of control and efficiency with InteliLite 4 AMF 8.
Introducing the InteliLite 4 AMF 8, a user-friendly and adaptable single gen-set controller engineered for stand-by and prime power applications. Its connectivity and communication features empower remote monitoring, allowing you to oversee your sites from anywhere at any time.
InteliLite 4 AMF 9 Single Gen-Set Controller
Key Features
User-friendly and easily configurable, the InteliLite 4 AMF 9 delivers secure and adaptable control for single gen-sets in both stand-by and prime power applications. With advanced connectivity and communication features, this product facilitates real-time site monitoring from anywhere.
InteliGen4 200 Standard parallel gen-set controller
| Phase |
Single Phase
|
| Automation Grade |
Automatic
|
| Brand |
ComAp
|
| Body Material |
CRCA
|
| Model Name |
InteliGen4 200
|
| E-Stop Fusing |
10 Amp
|
| Protection Degree |
IP 65
|
| Max. Output Current |
250 mA
|
| Accuracy |
1 %
|
| Resolution |
132 x 64 px
|
| USB Device |
Non-isolated type B connector
|
| USB Host |
Non-isolated type A connector
|
| Operating Temperature Range |
-20 DegreeC to +70 DegreeC
|
InteliLite NT MRS 10 Single Set Genset Controller
Benefits:
InteliLite NT MRS 16 Manual Remote Start (MRS) Gen-Set Controller
InteliLite NT AMF 20 Comap Automatic Mains Failure
The InteliLite 4 AMF 20 stands out as a sophisticated single gen-set controller crafted for stand-by and prime power applications. With its user-friendly, flexible, and straightforward design, this controller ensures ease of installation and operation. Explore a range of configuration options to tailor the perfect solution for efficiently managing and monitoring your generator sets, whether on-site or remotely.
DSE4520-MKII Auto Mains (Utility) Failure Genset Controller
Key Features:
Large back-lit icon LCD display.
Heated display option.
3-phase generator sensing.
3-phase generator and mains (utility) sensing.
600 V ph-ph nominal system compatibility.
Generator & load power monitoring (kW, kV A, kV Ar, pf).
Generator overload protection (kW).
Configurable inputs & outputs.
Fuel and start outputs (configurable on CAN).
Configurable DC, volt-free and staged loading outputs.
CAN & alternator speed sensing.
Engine speed protection, engine hours counter, engine pre-heat, engine run-time scheduler, engine idle control for start/stop.
Battery voltage monitoring.
Configurable event log (50).
DSE Configuration Suite PC Software.
Dse 5110 Auto Generator LCD Indication Genset Controller
| Controll Funtion | Protection Funtion | Data display |
| Auto-test Commercial power | Low-Lubrition Oil | Battery Voltage |
| Emergence Stop | Charging failure | Oil pressure |
| Manual Start/STOP | Over Voltage,Over load | Operation Time |
| Long-Distance Start/Stop | High water temperature | Frequency |
| Auto quit of Start motor | Over frequency | Voltage |
| Double power swicth transfer controll | Low Frequency | Amper |
| Stop Failure | Water Temperature | |
| Start Failure | Speed |
Dse 5220 Auto (Mains) Utility Failure Generator Controller
• Automatic start
• Automatic load transfer
• Configurable inputs
• Configurable outputs
• Configurable alarms & timers
• Digital inputs
• Analogue inputs
• Back-lit character LCD display
• Engine protection
• Front panel mounting
• PC configurable
• Front panel programming
• Remote monitoring
DSE6020 MKII – Auto Mains (Utility) Failure Control Module, 24V DC
| Voltage |
24V DC
|
| Brand |
Deep Sea Electronics
|
| Continuous Voltage Rating |
8-35 V
|
| Maximum Operating Current |
100 mA at 12 V, 105 mA at 24 V
|
| Frequency |
3.5-75 Hz
|
| Dimensions |
216 mm x 158 mm x 43 mm (8.5″ x 6.2″ x 1.5″)
|
| Panel Cutout Dimensions |
184 mm x 137 mm (7.2″ x 5.3″)
|
| Maximum Panel Thickness |
8.0 mm (0.3″)
|
| Operating Temperature Range |
-30 DegreeC to +70 DegreeC (-22 DegreeF to +158 DegreeF)
|
| Storage Temperature Range |
-40 DegreeC to +85 DegreeC (-40 DegreeF to +185 DegreeF)
|
| Degree of Protection |
IP65 (when installed with optional sealing gasket)
|
Catch Daily Deals!
Go to Daily Deals Section-
-
Generator Spare Parts
Genuine and Brand New Volvo Engine Control Module Ecm, ECU
Volvo Penta ECU (Engine Control Unit) is an important part of the generator engine using diesel. To make it easier to understand and visualize, you can understand that the ECU is the black box part, which is like a “brain” that can receive information, control, and record the activities of the generator engine.
Today, modern society is developing more and more, the demand for good and optimal engine selection is also increasing, leading to many brands being born. However, to achieve the most performance and stability in the manufacturing process, ECU engines usually dominate. Volvo Penta ECU is one of the oldest and best brands in the world in the field of industrial engine production.
SKU: n/a -
-
Controller Modules
Mebay DC30D Newly Porduced Engine Controller Generator Controller
Summary
This Controller Series is specialized for small diesel, gasoline, gas generator sets’start, stop,monitor and defaults checking as well as parameters setting. The controller has a point array LCD screen, can display various faults in the same time that the genset will be stopped once it can not work smoothly. There are Chinese/English interface options, more language can be set according to user’s request. All the parameters can be configured through the front face buttons or use programmable interface by USB to adjust via PC. It can be widely applied for all kinds of auto control system of gensets.
SKU: n/a -
Controller Modules
MeBay DC42D MK3 Generator Set Controller Module Diesel
Summary
This series controller is specialized for Diesel / Gasoline / Gas Genset Start, Stop, Parameters monitoring, faults-checking as well as data setting. 3.0 inch LCD screen display with brand new UI design is adapted in this controller that the relative failures can be displayed directly. All the parameters can be displayed by simulated indicators and words. Besides, LCD screen can display various faults in the same time that the genset will be stopped once it can’t work smoothly. There are Chinese/English interface options, more language can be set according to user’s request. All the parameters can be configured through the front face buttons or use programmable interface by RS485 or USB to adjust via PC. It can be widely applied for all kinds of auto control system of gensets.
SKU: n/a -
Controller Modules
Meybay DC50D MK3 Genset Controllers for Generator
Summary
This series controller is specialized for Diesel / Gasoline / Gas Genset Start, Stop, Parameters monitoring, faults-checking as well as data setting. 3.5 inch LCD screen display with brand new UI design is adapted in this controller that the relative failures can be displayed directly. All the parameters can be displayed by simulated indicators and words. Besides, LCD screen can display various faults in the same time that the genset will be stopped once it can’t work smoothly. There are Chinese/English interface options, more language can be set according to user’s request. All the parameters can be configured through the front face buttons or use programmable interface by RS485 or USB to adjust via PC. It can be widely applied for all kinds of auto control system of gensets.
SKU: n/a -
Controller Modules
Mebay DC70D Amf Auto Start Diesel Generator Controller
Main Features
- Standard CAN communication port, built-in J1939 protocol, has matched more than 30 kinds of engines;
- Various kinds of parameters display.
- Input/output function, status can be shown directly.
- More categories of surface setting.
- Real time clock inside: preset time operate and auto maintenance is available. Genset working plan can be set as per week or month.
- Three class protection countdown function, which can set the maintenance time or date.
- The black box function can save the relevant parameters of the unit when the fault alarm occurs in real time, and it is convenient to find the cause of the fault.
- Totally 7relay’s output, among which 5 relay output can be self-configurable, each relay can be set as max 50 functions, besides, there are 4 groups as non-contact terminals.
- With 5 switchesinput, up to 40 functions optional;
- 4sensor simulation input connectors, the oil pressure sensor is compatible with voltage signal input, and various display units can be configured.
- Battery charging control function,which can protect the battery according to battery voltage status.
- Sensor can be self-defined by front face button or PC software.
- Adapt to 3P4W,1P2W,2P3W(120V/240V,50/60HZ)
- Various of crank conditions (RPM, Frequency, Oil Pressure) can be chosen.
- Control Protection: Auto Start/Stop of genset, load transfer (ATS control) and perfect failure display and protection.
- Standard water-proof rubber gasket. The waterproof can reach IP54
SKU: n/a -
Controller Modules
Mebay DC72D Amf Auto Start Diesel Generator Controller
Main Features
- Standard CAN communication port, built-in J1939 protocol, has matched more than 30 kinds of engines;
- Various kinds of parameters display.
- Input/output function, status can be shown directly.
- More categories of surface setting.
- Real time clock inside: preset time operate and auto maintenance is available. Genset working plan can be set as per week or month.
- Three class protection countdown function, which can set the maintenance time or date.
- The black box function can save the relevant parameters of the unit when the fault alarm occurs in real time, and it is convenient to find the cause of the fault.
- Totally 7relay’s output, among which 5 relay output can be self-configurable, each relay can be set as max 50 functions, besides, there are 4 groups as non-contact terminals.
- With 5 switchesinput, up to 40 functions optional;
- 4sensor simulation input connectors, the oil pressure sensor is compatible with voltage signal input, and various display units can be configured.
- Battery charging control function,which can protect the battery according to battery voltage status.
- Sensor can be self-defined by front face button or PC software.
- Adapt to 3P4W,1P2W,2P3W(120V/240V,50/60HZ)
- Various of crank conditions (RPM, Frequency, Oil Pressure) can be chosen.
- Control Protection: Auto Start/Stop of genset, load transfer (ATS control) and perfect failure display and protection.
- Standard water-proof rubber gasket. The waterproof can reach IP54
SKU: n/a -
Controller Modules
Mebay Generator Controller DC90d Auto Control Module
Main Features1. 4.3inch TFT colorful big screen LCD, Available in 5 languages, user’s language set if necessary2. Indicator and number display through UI surface.3. USB Port and Standard CAN communication port, built-in J1939 protocol, has matched more than 30 kinds of engines4. Real time clock inside, Three class protection countdown function, and the black box functionSKU: n/a -
Controller Modules
Mebay Generator Controller DC92D Genset Control Module With CAN Port J1939 Protocol
-17%Controller ModulesMebay Generator Controller DC92D Genset Control Module With CAN Port J1939 Protocol
Main Features1. 4.3inch TFT colorful big screen LCD, Available in 5 languages, user’s language set if necessary2. Indicator and number display through UI surface.
3. USB Port and Standard CAN communication port, built-in J1939 protocol, has matched more than 30 kinds of engines
4. Real time clock inside, Three class protection countdown function, and the black box functionSKU: n/a
-
Controller Modules
InteliLite 4 AMF 8 Single Gen-Set Controller
Key features include:
- Streamlined configuration with InteliConfig
- Seamless remote monitoring capabilities
- Cybersecurity integrated by design
- Simplified troubleshooting processes
- Built-in PLC logic for enhanced functionality
Discover a new level of control and efficiency with InteliLite 4 AMF 8.
Introducing the InteliLite 4 AMF 8, a user-friendly and adaptable single gen-set controller engineered for stand-by and prime power applications. Its connectivity and communication features empower remote monitoring, allowing you to oversee your sites from anywhere at any time.
SKU: n/a -
Controller Modules
InteliLite 4 AMF 9 Single Gen-Set Controller
Key Features
- Easy configuration with InteliConfig
- Remote monitoring
- Cybersecurity by design
- Easy troubleshooting
- Built-in PLC logic
User-friendly and easily configurable, the InteliLite 4 AMF 9 delivers secure and adaptable control for single gen-sets in both stand-by and prime power applications. With advanced connectivity and communication features, this product facilitates real-time site monitoring from anywhere.
SKU: n/a -
Controller Modules
InteliGen4 200 Standard parallel gen-set controller
Phase Single PhaseAutomation Grade AutomaticBrand ComApBody Material CRCAModel Name InteliGen4 200E-Stop Fusing 10 AmpProtection Degree IP 65Max. Output Current 250 mAAccuracy 1 %Resolution 132 x 64 pxUSB Device Non-isolated type B connectorUSB Host Non-isolated type A connectorOperating Temperature Range -20 DegreeC to +70 DegreeCSKU: n/a -
Controller Modules
InteliLite NT MRS 10 Single Set Genset Controller
Benefits:
- Less wiring and components
- Less engineering and programming
- Remote monitoring helps reduce call-out costs of service engineers
- Optional additional 8 binary inputs/outputs
- Optional Internet with control and monitoring over web pages
- Support of wireless Internet
- Active SMS / E-mails
- Direct communication with EFI engines
- Perfect price / performance ratio
SKU: n/a -
Controller Modules
InteliLite NT MRS 16 Manual Remote Start (MRS) Gen-Set Controller
COMAP-MRS16- Multi DC Voltage Compatible
- Multi Phase Compatible
- Auxilluary Inputs
- Remote Start System
- Solar Inverter Compatible
- Engine Monitoring / Watchdog
- Alternator Monitoring
- Simple User friendly display
- 1000 event log
- Options of LAN / 3g or4g and other protocols
SKU: n/a -
Controller Modules
InteliLite NT AMF 20 Comap Automatic Mains Failure
The InteliLite 4 AMF 20 stands out as a sophisticated single gen-set controller crafted for stand-by and prime power applications. With its user-friendly, flexible, and straightforward design, this controller ensures ease of installation and operation. Explore a range of configuration options to tailor the perfect solution for efficiently managing and monitoring your generator sets, whether on-site or remotely.
- Easy configuration with InteliConfig
- Remote monitoring
- Cybersecurity by design
- Easy troubleshooting
- Built-in PLC logic
SKU: n/a -
Controller Modules
DSE4520-MKII Auto Mains (Utility) Failure Genset Controller
Key Features:
Large back-lit icon LCD display.
Heated display option.
3-phase generator sensing.
3-phase generator and mains (utility) sensing.
600 V ph-ph nominal system compatibility.
Generator & load power monitoring (kW, kV A, kV Ar, pf).
Generator overload protection (kW).
Configurable inputs & outputs.
Fuel and start outputs (configurable on CAN).
Configurable DC, volt-free and staged loading outputs.
CAN & alternator speed sensing.
Engine speed protection, engine hours counter, engine pre-heat, engine run-time scheduler, engine idle control for start/stop.
Battery voltage monitoring.
Configurable event log (50).
DSE Configuration Suite PC Software.SKU: n/a -
Controller Modules
Dse 5110 Auto Generator LCD Indication Genset Controller
Controll Funtion Protection Funtion Data display Auto-test Commercial power Low-Lubrition Oil Battery Voltage Emergence Stop Charging failure Oil pressure Manual Start/STOP Over Voltage,Over load Operation Time Long-Distance Start/Stop High water temperature Frequency Auto quit of Start motor Over frequency Voltage Double power swicth transfer controll Low Frequency Amper Stop Failure Water Temperature Start Failure Speed SKU: n/a -
Controller Modules
Dse 5220 Auto (Mains) Utility Failure Generator Controller
• Automatic start
• Automatic load transfer
• Configurable inputs
• Configurable outputs
• Configurable alarms & timers
• Digital inputs
• Analogue inputs
• Back-lit character LCD display
• Engine protection
• Front panel mounting
• PC configurable
• Front panel programming
• Remote monitoring
SKU: n/a -
Controller Modules
DSE6020 MKII – Auto Mains (Utility) Failure Control Module, 24V DC
Voltage 24V DCBrand Deep Sea ElectronicsContinuous Voltage Rating 8-35 VMaximum Operating Current 100 mA at 12 V, 105 mA at 24 VFrequency 3.5-75 HzDimensions 216 mm x 158 mm x 43 mm (8.5″ x 6.2″ x 1.5″)Panel Cutout Dimensions 184 mm x 137 mm (7.2″ x 5.3″)Maximum Panel Thickness 8.0 mm (0.3″)Operating Temperature Range -30 DegreeC to +70 DegreeC (-22 DegreeF to +158 DegreeF)Storage Temperature Range -40 DegreeC to +85 DegreeC (-40 DegreeF to +185 DegreeF)Degree of Protection IP65 (when installed with optional sealing gasket)SKU: n/a
-
-
Generator Spare Parts
Genuine and Brand New Volvo Engine Control Module Ecm, ECU
Volvo Penta ECU (Engine Control Unit) is an important part of the generator engine using diesel. To make it easier to understand and visualize, you can understand that the ECU is the black box part, which is like a “brain” that can receive information, control, and record the activities of the generator engine.
Today, modern society is developing more and more, the demand for good and optimal engine selection is also increasing, leading to many brands being born. However, to achieve the most performance and stability in the manufacturing process, ECU engines usually dominate. Volvo Penta ECU is one of the oldest and best brands in the world in the field of industrial engine production.
SKU: n/a -
-
Controller Modules
Mebay DC30D Newly Porduced Engine Controller Generator Controller
Summary
This Controller Series is specialized for small diesel, gasoline, gas generator sets’start, stop,monitor and defaults checking as well as parameters setting. The controller has a point array LCD screen, can display various faults in the same time that the genset will be stopped once it can not work smoothly. There are Chinese/English interface options, more language can be set according to user’s request. All the parameters can be configured through the front face buttons or use programmable interface by USB to adjust via PC. It can be widely applied for all kinds of auto control system of gensets.
SKU: n/a -
Controller Modules
MeBay DC42D MK3 Generator Set Controller Module Diesel
Summary
This series controller is specialized for Diesel / Gasoline / Gas Genset Start, Stop, Parameters monitoring, faults-checking as well as data setting. 3.0 inch LCD screen display with brand new UI design is adapted in this controller that the relative failures can be displayed directly. All the parameters can be displayed by simulated indicators and words. Besides, LCD screen can display various faults in the same time that the genset will be stopped once it can’t work smoothly. There are Chinese/English interface options, more language can be set according to user’s request. All the parameters can be configured through the front face buttons or use programmable interface by RS485 or USB to adjust via PC. It can be widely applied for all kinds of auto control system of gensets.
SKU: n/a -
Controller Modules
Meybay DC50D MK3 Genset Controllers for Generator
Summary
This series controller is specialized for Diesel / Gasoline / Gas Genset Start, Stop, Parameters monitoring, faults-checking as well as data setting. 3.5 inch LCD screen display with brand new UI design is adapted in this controller that the relative failures can be displayed directly. All the parameters can be displayed by simulated indicators and words. Besides, LCD screen can display various faults in the same time that the genset will be stopped once it can’t work smoothly. There are Chinese/English interface options, more language can be set according to user’s request. All the parameters can be configured through the front face buttons or use programmable interface by RS485 or USB to adjust via PC. It can be widely applied for all kinds of auto control system of gensets.
SKU: n/a -
Controller Modules
Mebay DC70D Amf Auto Start Diesel Generator Controller
Main Features
- Standard CAN communication port, built-in J1939 protocol, has matched more than 30 kinds of engines;
- Various kinds of parameters display.
- Input/output function, status can be shown directly.
- More categories of surface setting.
- Real time clock inside: preset time operate and auto maintenance is available. Genset working plan can be set as per week or month.
- Three class protection countdown function, which can set the maintenance time or date.
- The black box function can save the relevant parameters of the unit when the fault alarm occurs in real time, and it is convenient to find the cause of the fault.
- Totally 7relay’s output, among which 5 relay output can be self-configurable, each relay can be set as max 50 functions, besides, there are 4 groups as non-contact terminals.
- With 5 switchesinput, up to 40 functions optional;
- 4sensor simulation input connectors, the oil pressure sensor is compatible with voltage signal input, and various display units can be configured.
- Battery charging control function,which can protect the battery according to battery voltage status.
- Sensor can be self-defined by front face button or PC software.
- Adapt to 3P4W,1P2W,2P3W(120V/240V,50/60HZ)
- Various of crank conditions (RPM, Frequency, Oil Pressure) can be chosen.
- Control Protection: Auto Start/Stop of genset, load transfer (ATS control) and perfect failure display and protection.
- Standard water-proof rubber gasket. The waterproof can reach IP54
SKU: n/a -
Controller Modules
Mebay DC72D Amf Auto Start Diesel Generator Controller
Main Features
- Standard CAN communication port, built-in J1939 protocol, has matched more than 30 kinds of engines;
- Various kinds of parameters display.
- Input/output function, status can be shown directly.
- More categories of surface setting.
- Real time clock inside: preset time operate and auto maintenance is available. Genset working plan can be set as per week or month.
- Three class protection countdown function, which can set the maintenance time or date.
- The black box function can save the relevant parameters of the unit when the fault alarm occurs in real time, and it is convenient to find the cause of the fault.
- Totally 7relay’s output, among which 5 relay output can be self-configurable, each relay can be set as max 50 functions, besides, there are 4 groups as non-contact terminals.
- With 5 switchesinput, up to 40 functions optional;
- 4sensor simulation input connectors, the oil pressure sensor is compatible with voltage signal input, and various display units can be configured.
- Battery charging control function,which can protect the battery according to battery voltage status.
- Sensor can be self-defined by front face button or PC software.
- Adapt to 3P4W,1P2W,2P3W(120V/240V,50/60HZ)
- Various of crank conditions (RPM, Frequency, Oil Pressure) can be chosen.
- Control Protection: Auto Start/Stop of genset, load transfer (ATS control) and perfect failure display and protection.
- Standard water-proof rubber gasket. The waterproof can reach IP54
SKU: n/a -
Controller Modules
Mebay Generator Controller DC90d Auto Control Module
Main Features1. 4.3inch TFT colorful big screen LCD, Available in 5 languages, user’s language set if necessary2. Indicator and number display through UI surface.3. USB Port and Standard CAN communication port, built-in J1939 protocol, has matched more than 30 kinds of engines4. Real time clock inside, Three class protection countdown function, and the black box functionSKU: n/a -
Controller Modules
Mebay Generator Controller DC92D Genset Control Module With CAN Port J1939 Protocol
-17%Controller ModulesMebay Generator Controller DC92D Genset Control Module With CAN Port J1939 Protocol
Main Features1. 4.3inch TFT colorful big screen LCD, Available in 5 languages, user’s language set if necessary2. Indicator and number display through UI surface.
3. USB Port and Standard CAN communication port, built-in J1939 protocol, has matched more than 30 kinds of engines
4. Real time clock inside, Three class protection countdown function, and the black box functionSKU: n/a
-
Controller Modules
InteliLite 4 AMF 8 Single Gen-Set Controller
Key features include:
- Streamlined configuration with InteliConfig
- Seamless remote monitoring capabilities
- Cybersecurity integrated by design
- Simplified troubleshooting processes
- Built-in PLC logic for enhanced functionality
Discover a new level of control and efficiency with InteliLite 4 AMF 8.
Introducing the InteliLite 4 AMF 8, a user-friendly and adaptable single gen-set controller engineered for stand-by and prime power applications. Its connectivity and communication features empower remote monitoring, allowing you to oversee your sites from anywhere at any time.
SKU: n/a -
Controller Modules
InteliLite 4 AMF 9 Single Gen-Set Controller
Key Features
- Easy configuration with InteliConfig
- Remote monitoring
- Cybersecurity by design
- Easy troubleshooting
- Built-in PLC logic
User-friendly and easily configurable, the InteliLite 4 AMF 9 delivers secure and adaptable control for single gen-sets in both stand-by and prime power applications. With advanced connectivity and communication features, this product facilitates real-time site monitoring from anywhere.
SKU: n/a -
Controller Modules
InteliGen4 200 Standard parallel gen-set controller
Phase Single PhaseAutomation Grade AutomaticBrand ComApBody Material CRCAModel Name InteliGen4 200E-Stop Fusing 10 AmpProtection Degree IP 65Max. Output Current 250 mAAccuracy 1 %Resolution 132 x 64 pxUSB Device Non-isolated type B connectorUSB Host Non-isolated type A connectorOperating Temperature Range -20 DegreeC to +70 DegreeCSKU: n/a -
Controller Modules
InteliLite NT MRS 10 Single Set Genset Controller
Benefits:
- Less wiring and components
- Less engineering and programming
- Remote monitoring helps reduce call-out costs of service engineers
- Optional additional 8 binary inputs/outputs
- Optional Internet with control and monitoring over web pages
- Support of wireless Internet
- Active SMS / E-mails
- Direct communication with EFI engines
- Perfect price / performance ratio
SKU: n/a -
Controller Modules
InteliLite NT MRS 16 Manual Remote Start (MRS) Gen-Set Controller
COMAP-MRS16- Multi DC Voltage Compatible
- Multi Phase Compatible
- Auxilluary Inputs
- Remote Start System
- Solar Inverter Compatible
- Engine Monitoring / Watchdog
- Alternator Monitoring
- Simple User friendly display
- 1000 event log
- Options of LAN / 3g or4g and other protocols
SKU: n/a -
Controller Modules
InteliLite NT AMF 20 Comap Automatic Mains Failure
The InteliLite 4 AMF 20 stands out as a sophisticated single gen-set controller crafted for stand-by and prime power applications. With its user-friendly, flexible, and straightforward design, this controller ensures ease of installation and operation. Explore a range of configuration options to tailor the perfect solution for efficiently managing and monitoring your generator sets, whether on-site or remotely.
- Easy configuration with InteliConfig
- Remote monitoring
- Cybersecurity by design
- Easy troubleshooting
- Built-in PLC logic
SKU: n/a -
Controller Modules
DSE4520-MKII Auto Mains (Utility) Failure Genset Controller
Key Features:
Large back-lit icon LCD display.
Heated display option.
3-phase generator sensing.
3-phase generator and mains (utility) sensing.
600 V ph-ph nominal system compatibility.
Generator & load power monitoring (kW, kV A, kV Ar, pf).
Generator overload protection (kW).
Configurable inputs & outputs.
Fuel and start outputs (configurable on CAN).
Configurable DC, volt-free and staged loading outputs.
CAN & alternator speed sensing.
Engine speed protection, engine hours counter, engine pre-heat, engine run-time scheduler, engine idle control for start/stop.
Battery voltage monitoring.
Configurable event log (50).
DSE Configuration Suite PC Software.SKU: n/a -
Controller Modules
Dse 5110 Auto Generator LCD Indication Genset Controller
Controll Funtion Protection Funtion Data display Auto-test Commercial power Low-Lubrition Oil Battery Voltage Emergence Stop Charging failure Oil pressure Manual Start/STOP Over Voltage,Over load Operation Time Long-Distance Start/Stop High water temperature Frequency Auto quit of Start motor Over frequency Voltage Double power swicth transfer controll Low Frequency Amper Stop Failure Water Temperature Start Failure Speed SKU: n/a -
Controller Modules
Dse 5220 Auto (Mains) Utility Failure Generator Controller
• Automatic start
• Automatic load transfer
• Configurable inputs
• Configurable outputs
• Configurable alarms & timers
• Digital inputs
• Analogue inputs
• Back-lit character LCD display
• Engine protection
• Front panel mounting
• PC configurable
• Front panel programming
• Remote monitoring
SKU: n/a -
Controller Modules
DSE6020 MKII – Auto Mains (Utility) Failure Control Module, 24V DC
Voltage 24V DCBrand Deep Sea ElectronicsContinuous Voltage Rating 8-35 VMaximum Operating Current 100 mA at 12 V, 105 mA at 24 VFrequency 3.5-75 HzDimensions 216 mm x 158 mm x 43 mm (8.5″ x 6.2″ x 1.5″)Panel Cutout Dimensions 184 mm x 137 mm (7.2″ x 5.3″)Maximum Panel Thickness 8.0 mm (0.3″)Operating Temperature Range -30 DegreeC to +70 DegreeC (-22 DegreeF to +158 DegreeF)Storage Temperature Range -40 DegreeC to +85 DegreeC (-40 DegreeF to +185 DegreeF)Degree of Protection IP65 (when installed with optional sealing gasket)SKU: n/a
-
-
Generator Spare Parts
Genuine and Brand New Volvo Engine Control Module Ecm, ECU
Volvo Penta ECU (Engine Control Unit) is an important part of the generator engine using diesel. To make it easier to understand and visualize, you can understand that the ECU is the black box part, which is like a “brain” that can receive information, control, and record the activities of the generator engine.
Today, modern society is developing more and more, the demand for good and optimal engine selection is also increasing, leading to many brands being born. However, to achieve the most performance and stability in the manufacturing process, ECU engines usually dominate. Volvo Penta ECU is one of the oldest and best brands in the world in the field of industrial engine production.
SKU: n/a -
-
Controller Modules
Mebay DC30D Newly Porduced Engine Controller Generator Controller
Summary
This Controller Series is specialized for small diesel, gasoline, gas generator sets’start, stop,monitor and defaults checking as well as parameters setting. The controller has a point array LCD screen, can display various faults in the same time that the genset will be stopped once it can not work smoothly. There are Chinese/English interface options, more language can be set according to user’s request. All the parameters can be configured through the front face buttons or use programmable interface by USB to adjust via PC. It can be widely applied for all kinds of auto control system of gensets.
SKU: n/a -
Controller Modules
MeBay DC42D MK3 Generator Set Controller Module Diesel
Summary
This series controller is specialized for Diesel / Gasoline / Gas Genset Start, Stop, Parameters monitoring, faults-checking as well as data setting. 3.0 inch LCD screen display with brand new UI design is adapted in this controller that the relative failures can be displayed directly. All the parameters can be displayed by simulated indicators and words. Besides, LCD screen can display various faults in the same time that the genset will be stopped once it can’t work smoothly. There are Chinese/English interface options, more language can be set according to user’s request. All the parameters can be configured through the front face buttons or use programmable interface by RS485 or USB to adjust via PC. It can be widely applied for all kinds of auto control system of gensets.
SKU: n/a -
Controller Modules
Meybay DC50D MK3 Genset Controllers for Generator
Summary
This series controller is specialized for Diesel / Gasoline / Gas Genset Start, Stop, Parameters monitoring, faults-checking as well as data setting. 3.5 inch LCD screen display with brand new UI design is adapted in this controller that the relative failures can be displayed directly. All the parameters can be displayed by simulated indicators and words. Besides, LCD screen can display various faults in the same time that the genset will be stopped once it can’t work smoothly. There are Chinese/English interface options, more language can be set according to user’s request. All the parameters can be configured through the front face buttons or use programmable interface by RS485 or USB to adjust via PC. It can be widely applied for all kinds of auto control system of gensets.
SKU: n/a -
Controller Modules
Mebay DC70D Amf Auto Start Diesel Generator Controller
Main Features
- Standard CAN communication port, built-in J1939 protocol, has matched more than 30 kinds of engines;
- Various kinds of parameters display.
- Input/output function, status can be shown directly.
- More categories of surface setting.
- Real time clock inside: preset time operate and auto maintenance is available. Genset working plan can be set as per week or month.
- Three class protection countdown function, which can set the maintenance time or date.
- The black box function can save the relevant parameters of the unit when the fault alarm occurs in real time, and it is convenient to find the cause of the fault.
- Totally 7relay’s output, among which 5 relay output can be self-configurable, each relay can be set as max 50 functions, besides, there are 4 groups as non-contact terminals.
- With 5 switchesinput, up to 40 functions optional;
- 4sensor simulation input connectors, the oil pressure sensor is compatible with voltage signal input, and various display units can be configured.
- Battery charging control function,which can protect the battery according to battery voltage status.
- Sensor can be self-defined by front face button or PC software.
- Adapt to 3P4W,1P2W,2P3W(120V/240V,50/60HZ)
- Various of crank conditions (RPM, Frequency, Oil Pressure) can be chosen.
- Control Protection: Auto Start/Stop of genset, load transfer (ATS control) and perfect failure display and protection.
- Standard water-proof rubber gasket. The waterproof can reach IP54
SKU: n/a -
Controller Modules
Mebay DC72D Amf Auto Start Diesel Generator Controller
Main Features
- Standard CAN communication port, built-in J1939 protocol, has matched more than 30 kinds of engines;
- Various kinds of parameters display.
- Input/output function, status can be shown directly.
- More categories of surface setting.
- Real time clock inside: preset time operate and auto maintenance is available. Genset working plan can be set as per week or month.
- Three class protection countdown function, which can set the maintenance time or date.
- The black box function can save the relevant parameters of the unit when the fault alarm occurs in real time, and it is convenient to find the cause of the fault.
- Totally 7relay’s output, among which 5 relay output can be self-configurable, each relay can be set as max 50 functions, besides, there are 4 groups as non-contact terminals.
- With 5 switchesinput, up to 40 functions optional;
- 4sensor simulation input connectors, the oil pressure sensor is compatible with voltage signal input, and various display units can be configured.
- Battery charging control function,which can protect the battery according to battery voltage status.
- Sensor can be self-defined by front face button or PC software.
- Adapt to 3P4W,1P2W,2P3W(120V/240V,50/60HZ)
- Various of crank conditions (RPM, Frequency, Oil Pressure) can be chosen.
- Control Protection: Auto Start/Stop of genset, load transfer (ATS control) and perfect failure display and protection.
- Standard water-proof rubber gasket. The waterproof can reach IP54
SKU: n/a -
Controller Modules
Mebay Generator Controller DC90d Auto Control Module
Main Features1. 4.3inch TFT colorful big screen LCD, Available in 5 languages, user’s language set if necessary2. Indicator and number display through UI surface.3. USB Port and Standard CAN communication port, built-in J1939 protocol, has matched more than 30 kinds of engines4. Real time clock inside, Three class protection countdown function, and the black box functionSKU: n/a -
Controller Modules
Mebay Generator Controller DC92D Genset Control Module With CAN Port J1939 Protocol
-17%Controller ModulesMebay Generator Controller DC92D Genset Control Module With CAN Port J1939 Protocol
Main Features1. 4.3inch TFT colorful big screen LCD, Available in 5 languages, user’s language set if necessary2. Indicator and number display through UI surface.
3. USB Port and Standard CAN communication port, built-in J1939 protocol, has matched more than 30 kinds of engines
4. Real time clock inside, Three class protection countdown function, and the black box functionSKU: n/a
-
Controller Modules
InteliLite 4 AMF 8 Single Gen-Set Controller
Key features include:
- Streamlined configuration with InteliConfig
- Seamless remote monitoring capabilities
- Cybersecurity integrated by design
- Simplified troubleshooting processes
- Built-in PLC logic for enhanced functionality
Discover a new level of control and efficiency with InteliLite 4 AMF 8.
Introducing the InteliLite 4 AMF 8, a user-friendly and adaptable single gen-set controller engineered for stand-by and prime power applications. Its connectivity and communication features empower remote monitoring, allowing you to oversee your sites from anywhere at any time.
SKU: n/a -
Controller Modules
InteliLite 4 AMF 9 Single Gen-Set Controller
Key Features
- Easy configuration with InteliConfig
- Remote monitoring
- Cybersecurity by design
- Easy troubleshooting
- Built-in PLC logic
User-friendly and easily configurable, the InteliLite 4 AMF 9 delivers secure and adaptable control for single gen-sets in both stand-by and prime power applications. With advanced connectivity and communication features, this product facilitates real-time site monitoring from anywhere.
SKU: n/a -
Controller Modules
InteliGen4 200 Standard parallel gen-set controller
Phase Single PhaseAutomation Grade AutomaticBrand ComApBody Material CRCAModel Name InteliGen4 200E-Stop Fusing 10 AmpProtection Degree IP 65Max. Output Current 250 mAAccuracy 1 %Resolution 132 x 64 pxUSB Device Non-isolated type B connectorUSB Host Non-isolated type A connectorOperating Temperature Range -20 DegreeC to +70 DegreeCSKU: n/a -
Controller Modules
InteliLite NT MRS 10 Single Set Genset Controller
Benefits:
- Less wiring and components
- Less engineering and programming
- Remote monitoring helps reduce call-out costs of service engineers
- Optional additional 8 binary inputs/outputs
- Optional Internet with control and monitoring over web pages
- Support of wireless Internet
- Active SMS / E-mails
- Direct communication with EFI engines
- Perfect price / performance ratio
SKU: n/a -
Controller Modules
InteliLite NT MRS 16 Manual Remote Start (MRS) Gen-Set Controller
COMAP-MRS16- Multi DC Voltage Compatible
- Multi Phase Compatible
- Auxilluary Inputs
- Remote Start System
- Solar Inverter Compatible
- Engine Monitoring / Watchdog
- Alternator Monitoring
- Simple User friendly display
- 1000 event log
- Options of LAN / 3g or4g and other protocols
SKU: n/a -
Controller Modules
InteliLite NT AMF 20 Comap Automatic Mains Failure
The InteliLite 4 AMF 20 stands out as a sophisticated single gen-set controller crafted for stand-by and prime power applications. With its user-friendly, flexible, and straightforward design, this controller ensures ease of installation and operation. Explore a range of configuration options to tailor the perfect solution for efficiently managing and monitoring your generator sets, whether on-site or remotely.
- Easy configuration with InteliConfig
- Remote monitoring
- Cybersecurity by design
- Easy troubleshooting
- Built-in PLC logic
SKU: n/a -
Controller Modules
DSE4520-MKII Auto Mains (Utility) Failure Genset Controller
Key Features:
Large back-lit icon LCD display.
Heated display option.
3-phase generator sensing.
3-phase generator and mains (utility) sensing.
600 V ph-ph nominal system compatibility.
Generator & load power monitoring (kW, kV A, kV Ar, pf).
Generator overload protection (kW).
Configurable inputs & outputs.
Fuel and start outputs (configurable on CAN).
Configurable DC, volt-free and staged loading outputs.
CAN & alternator speed sensing.
Engine speed protection, engine hours counter, engine pre-heat, engine run-time scheduler, engine idle control for start/stop.
Battery voltage monitoring.
Configurable event log (50).
DSE Configuration Suite PC Software.SKU: n/a -
Controller Modules
Dse 5110 Auto Generator LCD Indication Genset Controller
Controll Funtion Protection Funtion Data display Auto-test Commercial power Low-Lubrition Oil Battery Voltage Emergence Stop Charging failure Oil pressure Manual Start/STOP Over Voltage,Over load Operation Time Long-Distance Start/Stop High water temperature Frequency Auto quit of Start motor Over frequency Voltage Double power swicth transfer controll Low Frequency Amper Stop Failure Water Temperature Start Failure Speed SKU: n/a -
Controller Modules
Dse 5220 Auto (Mains) Utility Failure Generator Controller
• Automatic start
• Automatic load transfer
• Configurable inputs
• Configurable outputs
• Configurable alarms & timers
• Digital inputs
• Analogue inputs
• Back-lit character LCD display
• Engine protection
• Front panel mounting
• PC configurable
• Front panel programming
• Remote monitoring
SKU: n/a -
Controller Modules
DSE6020 MKII – Auto Mains (Utility) Failure Control Module, 24V DC
Voltage 24V DCBrand Deep Sea ElectronicsContinuous Voltage Rating 8-35 VMaximum Operating Current 100 mA at 12 V, 105 mA at 24 VFrequency 3.5-75 HzDimensions 216 mm x 158 mm x 43 mm (8.5″ x 6.2″ x 1.5″)Panel Cutout Dimensions 184 mm x 137 mm (7.2″ x 5.3″)Maximum Panel Thickness 8.0 mm (0.3″)Operating Temperature Range -30 DegreeC to +70 DegreeC (-22 DegreeF to +158 DegreeF)Storage Temperature Range -40 DegreeC to +85 DegreeC (-40 DegreeF to +185 DegreeF)Degree of Protection IP65 (when installed with optional sealing gasket)SKU: n/a
-
-
Generator Spare Parts
Genuine and Brand New Volvo Engine Control Module Ecm, ECU
Volvo Penta ECU (Engine Control Unit) is an important part of the generator engine using diesel. To make it easier to understand and visualize, you can understand that the ECU is the black box part, which is like a “brain” that can receive information, control, and record the activities of the generator engine.
Today, modern society is developing more and more, the demand for good and optimal engine selection is also increasing, leading to many brands being born. However, to achieve the most performance and stability in the manufacturing process, ECU engines usually dominate. Volvo Penta ECU is one of the oldest and best brands in the world in the field of industrial engine production.
SKU: n/a -
-
Controller Modules
Mebay DC30D Newly Porduced Engine Controller Generator Controller
Summary
This Controller Series is specialized for small diesel, gasoline, gas generator sets’start, stop,monitor and defaults checking as well as parameters setting. The controller has a point array LCD screen, can display various faults in the same time that the genset will be stopped once it can not work smoothly. There are Chinese/English interface options, more language can be set according to user’s request. All the parameters can be configured through the front face buttons or use programmable interface by USB to adjust via PC. It can be widely applied for all kinds of auto control system of gensets.
SKU: n/a -
Controller Modules
MeBay DC42D MK3 Generator Set Controller Module Diesel
Summary
This series controller is specialized for Diesel / Gasoline / Gas Genset Start, Stop, Parameters monitoring, faults-checking as well as data setting. 3.0 inch LCD screen display with brand new UI design is adapted in this controller that the relative failures can be displayed directly. All the parameters can be displayed by simulated indicators and words. Besides, LCD screen can display various faults in the same time that the genset will be stopped once it can’t work smoothly. There are Chinese/English interface options, more language can be set according to user’s request. All the parameters can be configured through the front face buttons or use programmable interface by RS485 or USB to adjust via PC. It can be widely applied for all kinds of auto control system of gensets.
SKU: n/a -
Controller Modules
Meybay DC50D MK3 Genset Controllers for Generator
Summary
This series controller is specialized for Diesel / Gasoline / Gas Genset Start, Stop, Parameters monitoring, faults-checking as well as data setting. 3.5 inch LCD screen display with brand new UI design is adapted in this controller that the relative failures can be displayed directly. All the parameters can be displayed by simulated indicators and words. Besides, LCD screen can display various faults in the same time that the genset will be stopped once it can’t work smoothly. There are Chinese/English interface options, more language can be set according to user’s request. All the parameters can be configured through the front face buttons or use programmable interface by RS485 or USB to adjust via PC. It can be widely applied for all kinds of auto control system of gensets.
SKU: n/a -
Controller Modules
Mebay DC70D Amf Auto Start Diesel Generator Controller
Main Features
- Standard CAN communication port, built-in J1939 protocol, has matched more than 30 kinds of engines;
- Various kinds of parameters display.
- Input/output function, status can be shown directly.
- More categories of surface setting.
- Real time clock inside: preset time operate and auto maintenance is available. Genset working plan can be set as per week or month.
- Three class protection countdown function, which can set the maintenance time or date.
- The black box function can save the relevant parameters of the unit when the fault alarm occurs in real time, and it is convenient to find the cause of the fault.
- Totally 7relay’s output, among which 5 relay output can be self-configurable, each relay can be set as max 50 functions, besides, there are 4 groups as non-contact terminals.
- With 5 switchesinput, up to 40 functions optional;
- 4sensor simulation input connectors, the oil pressure sensor is compatible with voltage signal input, and various display units can be configured.
- Battery charging control function,which can protect the battery according to battery voltage status.
- Sensor can be self-defined by front face button or PC software.
- Adapt to 3P4W,1P2W,2P3W(120V/240V,50/60HZ)
- Various of crank conditions (RPM, Frequency, Oil Pressure) can be chosen.
- Control Protection: Auto Start/Stop of genset, load transfer (ATS control) and perfect failure display and protection.
- Standard water-proof rubber gasket. The waterproof can reach IP54
SKU: n/a -
Controller Modules
Mebay DC72D Amf Auto Start Diesel Generator Controller
Main Features
- Standard CAN communication port, built-in J1939 protocol, has matched more than 30 kinds of engines;
- Various kinds of parameters display.
- Input/output function, status can be shown directly.
- More categories of surface setting.
- Real time clock inside: preset time operate and auto maintenance is available. Genset working plan can be set as per week or month.
- Three class protection countdown function, which can set the maintenance time or date.
- The black box function can save the relevant parameters of the unit when the fault alarm occurs in real time, and it is convenient to find the cause of the fault.
- Totally 7relay’s output, among which 5 relay output can be self-configurable, each relay can be set as max 50 functions, besides, there are 4 groups as non-contact terminals.
- With 5 switchesinput, up to 40 functions optional;
- 4sensor simulation input connectors, the oil pressure sensor is compatible with voltage signal input, and various display units can be configured.
- Battery charging control function,which can protect the battery according to battery voltage status.
- Sensor can be self-defined by front face button or PC software.
- Adapt to 3P4W,1P2W,2P3W(120V/240V,50/60HZ)
- Various of crank conditions (RPM, Frequency, Oil Pressure) can be chosen.
- Control Protection: Auto Start/Stop of genset, load transfer (ATS control) and perfect failure display and protection.
- Standard water-proof rubber gasket. The waterproof can reach IP54
SKU: n/a -
Controller Modules
Mebay Generator Controller DC90d Auto Control Module
Main Features1. 4.3inch TFT colorful big screen LCD, Available in 5 languages, user’s language set if necessary2. Indicator and number display through UI surface.3. USB Port and Standard CAN communication port, built-in J1939 protocol, has matched more than 30 kinds of engines4. Real time clock inside, Three class protection countdown function, and the black box functionSKU: n/a -
Controller Modules
Mebay Generator Controller DC92D Genset Control Module With CAN Port J1939 Protocol
-17%Controller ModulesMebay Generator Controller DC92D Genset Control Module With CAN Port J1939 Protocol
Main Features1. 4.3inch TFT colorful big screen LCD, Available in 5 languages, user’s language set if necessary2. Indicator and number display through UI surface.
3. USB Port and Standard CAN communication port, built-in J1939 protocol, has matched more than 30 kinds of engines
4. Real time clock inside, Three class protection countdown function, and the black box functionSKU: n/a
-
Controller Modules
InteliLite 4 AMF 8 Single Gen-Set Controller
Key features include:
- Streamlined configuration with InteliConfig
- Seamless remote monitoring capabilities
- Cybersecurity integrated by design
- Simplified troubleshooting processes
- Built-in PLC logic for enhanced functionality
Discover a new level of control and efficiency with InteliLite 4 AMF 8.
Introducing the InteliLite 4 AMF 8, a user-friendly and adaptable single gen-set controller engineered for stand-by and prime power applications. Its connectivity and communication features empower remote monitoring, allowing you to oversee your sites from anywhere at any time.
SKU: n/a -
Controller Modules
InteliLite 4 AMF 9 Single Gen-Set Controller
Key Features
- Easy configuration with InteliConfig
- Remote monitoring
- Cybersecurity by design
- Easy troubleshooting
- Built-in PLC logic
User-friendly and easily configurable, the InteliLite 4 AMF 9 delivers secure and adaptable control for single gen-sets in both stand-by and prime power applications. With advanced connectivity and communication features, this product facilitates real-time site monitoring from anywhere.
SKU: n/a -
Controller Modules
InteliGen4 200 Standard parallel gen-set controller
Phase Single PhaseAutomation Grade AutomaticBrand ComApBody Material CRCAModel Name InteliGen4 200E-Stop Fusing 10 AmpProtection Degree IP 65Max. Output Current 250 mAAccuracy 1 %Resolution 132 x 64 pxUSB Device Non-isolated type B connectorUSB Host Non-isolated type A connectorOperating Temperature Range -20 DegreeC to +70 DegreeCSKU: n/a -
Controller Modules
InteliLite NT MRS 10 Single Set Genset Controller
Benefits:
- Less wiring and components
- Less engineering and programming
- Remote monitoring helps reduce call-out costs of service engineers
- Optional additional 8 binary inputs/outputs
- Optional Internet with control and monitoring over web pages
- Support of wireless Internet
- Active SMS / E-mails
- Direct communication with EFI engines
- Perfect price / performance ratio
SKU: n/a -
Controller Modules
InteliLite NT MRS 16 Manual Remote Start (MRS) Gen-Set Controller
COMAP-MRS16- Multi DC Voltage Compatible
- Multi Phase Compatible
- Auxilluary Inputs
- Remote Start System
- Solar Inverter Compatible
- Engine Monitoring / Watchdog
- Alternator Monitoring
- Simple User friendly display
- 1000 event log
- Options of LAN / 3g or4g and other protocols
SKU: n/a -
Controller Modules
InteliLite NT AMF 20 Comap Automatic Mains Failure
The InteliLite 4 AMF 20 stands out as a sophisticated single gen-set controller crafted for stand-by and prime power applications. With its user-friendly, flexible, and straightforward design, this controller ensures ease of installation and operation. Explore a range of configuration options to tailor the perfect solution for efficiently managing and monitoring your generator sets, whether on-site or remotely.
- Easy configuration with InteliConfig
- Remote monitoring
- Cybersecurity by design
- Easy troubleshooting
- Built-in PLC logic
SKU: n/a -
Controller Modules
DSE4520-MKII Auto Mains (Utility) Failure Genset Controller
Key Features:
Large back-lit icon LCD display.
Heated display option.
3-phase generator sensing.
3-phase generator and mains (utility) sensing.
600 V ph-ph nominal system compatibility.
Generator & load power monitoring (kW, kV A, kV Ar, pf).
Generator overload protection (kW).
Configurable inputs & outputs.
Fuel and start outputs (configurable on CAN).
Configurable DC, volt-free and staged loading outputs.
CAN & alternator speed sensing.
Engine speed protection, engine hours counter, engine pre-heat, engine run-time scheduler, engine idle control for start/stop.
Battery voltage monitoring.
Configurable event log (50).
DSE Configuration Suite PC Software.SKU: n/a -
Controller Modules
Dse 5110 Auto Generator LCD Indication Genset Controller
Controll Funtion Protection Funtion Data display Auto-test Commercial power Low-Lubrition Oil Battery Voltage Emergence Stop Charging failure Oil pressure Manual Start/STOP Over Voltage,Over load Operation Time Long-Distance Start/Stop High water temperature Frequency Auto quit of Start motor Over frequency Voltage Double power swicth transfer controll Low Frequency Amper Stop Failure Water Temperature Start Failure Speed SKU: n/a -
Controller Modules
Dse 5220 Auto (Mains) Utility Failure Generator Controller
• Automatic start
• Automatic load transfer
• Configurable inputs
• Configurable outputs
• Configurable alarms & timers
• Digital inputs
• Analogue inputs
• Back-lit character LCD display
• Engine protection
• Front panel mounting
• PC configurable
• Front panel programming
• Remote monitoring
SKU: n/a -
Controller Modules
DSE6020 MKII – Auto Mains (Utility) Failure Control Module, 24V DC
Voltage 24V DCBrand Deep Sea ElectronicsContinuous Voltage Rating 8-35 VMaximum Operating Current 100 mA at 12 V, 105 mA at 24 VFrequency 3.5-75 HzDimensions 216 mm x 158 mm x 43 mm (8.5″ x 6.2″ x 1.5″)Panel Cutout Dimensions 184 mm x 137 mm (7.2″ x 5.3″)Maximum Panel Thickness 8.0 mm (0.3″)Operating Temperature Range -30 DegreeC to +70 DegreeC (-22 DegreeF to +158 DegreeF)Storage Temperature Range -40 DegreeC to +85 DegreeC (-40 DegreeF to +185 DegreeF)Degree of Protection IP65 (when installed with optional sealing gasket)SKU: n/a
Trending products
Trending productsGenuine and Brand New Volvo Engine Control Module Ecm, ECU
Volvo Penta ECU (Engine Control Unit) is an important part of the generator engine using diesel. To make it easier to understand and visualize, you can understand that the ECU is the black box part, which is like a “brain” that can receive information, control, and record the activities of the generator engine.
Today, modern society is developing more and more, the demand for good and optimal engine selection is also increasing, leading to many brands being born. However, to achieve the most performance and stability in the manufacturing process, ECU engines usually dominate. Volvo Penta ECU is one of the oldest and best brands in the world in the field of industrial engine production.
Mebay DC30D Newly Porduced Engine Controller Generator Controller
Summary
This Controller Series is specialized for small diesel, gasoline, gas generator sets’start, stop,monitor and defaults checking as well as parameters setting. The controller has a point array LCD screen, can display various faults in the same time that the genset will be stopped once it can not work smoothly. There are Chinese/English interface options, more language can be set according to user’s request. All the parameters can be configured through the front face buttons or use programmable interface by USB to adjust via PC. It can be widely applied for all kinds of auto control system of gensets.
MeBay DC42D MK3 Generator Set Controller Module Diesel
Summary
This series controller is specialized for Diesel / Gasoline / Gas Genset Start, Stop, Parameters monitoring, faults-checking as well as data setting. 3.0 inch LCD screen display with brand new UI design is adapted in this controller that the relative failures can be displayed directly. All the parameters can be displayed by simulated indicators and words. Besides, LCD screen can display various faults in the same time that the genset will be stopped once it can’t work smoothly. There are Chinese/English interface options, more language can be set according to user’s request. All the parameters can be configured through the front face buttons or use programmable interface by RS485 or USB to adjust via PC. It can be widely applied for all kinds of auto control system of gensets.
Meybay DC50D MK3 Genset Controllers for Generator
Summary
This series controller is specialized for Diesel / Gasoline / Gas Genset Start, Stop, Parameters monitoring, faults-checking as well as data setting. 3.5 inch LCD screen display with brand new UI design is adapted in this controller that the relative failures can be displayed directly. All the parameters can be displayed by simulated indicators and words. Besides, LCD screen can display various faults in the same time that the genset will be stopped once it can’t work smoothly. There are Chinese/English interface options, more language can be set according to user’s request. All the parameters can be configured through the front face buttons or use programmable interface by RS485 or USB to adjust via PC. It can be widely applied for all kinds of auto control system of gensets.
Mebay DC70D Amf Auto Start Diesel Generator Controller
Main Features
Mebay DC72D Amf Auto Start Diesel Generator Controller
Main Features
Mebay Generator Controller DC90d Auto Control Module
Mebay Generator Controller DC92D Genset Control Module With CAN Port J1939 Protocol
Mebay Generator Controller DC92D Genset Control Module With CAN Port J1939 Protocol
3. USB Port and Standard CAN communication port, built-in J1939 protocol, has matched more than 30 kinds of engines
4. Real time clock inside, Three class protection countdown function, and the black box function
InteliLite 4 AMF 8 Single Gen-Set Controller
Key features include:
Discover a new level of control and efficiency with InteliLite 4 AMF 8.
Introducing the InteliLite 4 AMF 8, a user-friendly and adaptable single gen-set controller engineered for stand-by and prime power applications. Its connectivity and communication features empower remote monitoring, allowing you to oversee your sites from anywhere at any time.
InteliLite 4 AMF 9 Single Gen-Set Controller
Key Features
User-friendly and easily configurable, the InteliLite 4 AMF 9 delivers secure and adaptable control for single gen-sets in both stand-by and prime power applications. With advanced connectivity and communication features, this product facilitates real-time site monitoring from anywhere.
InteliGen4 200 Standard parallel gen-set controller
| Phase |
Single Phase
|
| Automation Grade |
Automatic
|
| Brand |
ComAp
|
| Body Material |
CRCA
|
| Model Name |
InteliGen4 200
|
| E-Stop Fusing |
10 Amp
|
| Protection Degree |
IP 65
|
| Max. Output Current |
250 mA
|
| Accuracy |
1 %
|
| Resolution |
132 x 64 px
|
| USB Device |
Non-isolated type B connector
|
| USB Host |
Non-isolated type A connector
|
| Operating Temperature Range |
-20 DegreeC to +70 DegreeC
|
InteliLite NT MRS 10 Single Set Genset Controller
Benefits:
InteliLite NT MRS 16 Manual Remote Start (MRS) Gen-Set Controller
InteliLite NT AMF 20 Comap Automatic Mains Failure
The InteliLite 4 AMF 20 stands out as a sophisticated single gen-set controller crafted for stand-by and prime power applications. With its user-friendly, flexible, and straightforward design, this controller ensures ease of installation and operation. Explore a range of configuration options to tailor the perfect solution for efficiently managing and monitoring your generator sets, whether on-site or remotely.
DSE4520-MKII Auto Mains (Utility) Failure Genset Controller
Key Features:
Large back-lit icon LCD display.
Heated display option.
3-phase generator sensing.
3-phase generator and mains (utility) sensing.
600 V ph-ph nominal system compatibility.
Generator & load power monitoring (kW, kV A, kV Ar, pf).
Generator overload protection (kW).
Configurable inputs & outputs.
Fuel and start outputs (configurable on CAN).
Configurable DC, volt-free and staged loading outputs.
CAN & alternator speed sensing.
Engine speed protection, engine hours counter, engine pre-heat, engine run-time scheduler, engine idle control for start/stop.
Battery voltage monitoring.
Configurable event log (50).
DSE Configuration Suite PC Software.
Dse 5110 Auto Generator LCD Indication Genset Controller
| Controll Funtion | Protection Funtion | Data display |
| Auto-test Commercial power | Low-Lubrition Oil | Battery Voltage |
| Emergence Stop | Charging failure | Oil pressure |
| Manual Start/STOP | Over Voltage,Over load | Operation Time |
| Long-Distance Start/Stop | High water temperature | Frequency |
| Auto quit of Start motor | Over frequency | Voltage |
| Double power swicth transfer controll | Low Frequency | Amper |
| Stop Failure | Water Temperature | |
| Start Failure | Speed |
Dse 5220 Auto (Mains) Utility Failure Generator Controller
• Automatic start
• Automatic load transfer
• Configurable inputs
• Configurable outputs
• Configurable alarms & timers
• Digital inputs
• Analogue inputs
• Back-lit character LCD display
• Engine protection
• Front panel mounting
• PC configurable
• Front panel programming
• Remote monitoring
DSE6020 MKII – Auto Mains (Utility) Failure Control Module, 24V DC
| Voltage |
24V DC
|
| Brand |
Deep Sea Electronics
|
| Continuous Voltage Rating |
8-35 V
|
| Maximum Operating Current |
100 mA at 12 V, 105 mA at 24 V
|
| Frequency |
3.5-75 Hz
|
| Dimensions |
216 mm x 158 mm x 43 mm (8.5″ x 6.2″ x 1.5″)
|
| Panel Cutout Dimensions |
184 mm x 137 mm (7.2″ x 5.3″)
|
| Maximum Panel Thickness |
8.0 mm (0.3″)
|
| Operating Temperature Range |
-30 DegreeC to +70 DegreeC (-22 DegreeF to +158 DegreeF)
|
| Storage Temperature Range |
-40 DegreeC to +85 DegreeC (-40 DegreeF to +185 DegreeF)
|
| Degree of Protection |
IP65 (when installed with optional sealing gasket)
|
Laptops & Computers
Genuine and Brand New Volvo Engine Control Module Ecm, ECU
Volvo Penta ECU (Engine Control Unit) is an important part of the generator engine using diesel. To make it easier to understand and visualize, you can understand that the ECU is the black box part, which is like a “brain” that can receive information, control, and record the activities of the generator engine.
Today, modern society is developing more and more, the demand for good and optimal engine selection is also increasing, leading to many brands being born. However, to achieve the most performance and stability in the manufacturing process, ECU engines usually dominate. Volvo Penta ECU is one of the oldest and best brands in the world in the field of industrial engine production.
Mebay DC30D Newly Porduced Engine Controller Generator Controller
Summary
This Controller Series is specialized for small diesel, gasoline, gas generator sets’start, stop,monitor and defaults checking as well as parameters setting. The controller has a point array LCD screen, can display various faults in the same time that the genset will be stopped once it can not work smoothly. There are Chinese/English interface options, more language can be set according to user’s request. All the parameters can be configured through the front face buttons or use programmable interface by USB to adjust via PC. It can be widely applied for all kinds of auto control system of gensets.
MeBay DC42D MK3 Generator Set Controller Module Diesel
Summary
This series controller is specialized for Diesel / Gasoline / Gas Genset Start, Stop, Parameters monitoring, faults-checking as well as data setting. 3.0 inch LCD screen display with brand new UI design is adapted in this controller that the relative failures can be displayed directly. All the parameters can be displayed by simulated indicators and words. Besides, LCD screen can display various faults in the same time that the genset will be stopped once it can’t work smoothly. There are Chinese/English interface options, more language can be set according to user’s request. All the parameters can be configured through the front face buttons or use programmable interface by RS485 or USB to adjust via PC. It can be widely applied for all kinds of auto control system of gensets.
Meybay DC50D MK3 Genset Controllers for Generator
Summary
This series controller is specialized for Diesel / Gasoline / Gas Genset Start, Stop, Parameters monitoring, faults-checking as well as data setting. 3.5 inch LCD screen display with brand new UI design is adapted in this controller that the relative failures can be displayed directly. All the parameters can be displayed by simulated indicators and words. Besides, LCD screen can display various faults in the same time that the genset will be stopped once it can’t work smoothly. There are Chinese/English interface options, more language can be set according to user’s request. All the parameters can be configured through the front face buttons or use programmable interface by RS485 or USB to adjust via PC. It can be widely applied for all kinds of auto control system of gensets.
Mebay DC70D Amf Auto Start Diesel Generator Controller
Main Features
Mebay DC72D Amf Auto Start Diesel Generator Controller
Main Features
Mebay Generator Controller DC90d Auto Control Module
Mebay Generator Controller DC92D Genset Control Module With CAN Port J1939 Protocol
Mebay Generator Controller DC92D Genset Control Module With CAN Port J1939 Protocol
3. USB Port and Standard CAN communication port, built-in J1939 protocol, has matched more than 30 kinds of engines
4. Real time clock inside, Three class protection countdown function, and the black box function
InteliLite 4 AMF 8 Single Gen-Set Controller
Key features include:
Discover a new level of control and efficiency with InteliLite 4 AMF 8.
Introducing the InteliLite 4 AMF 8, a user-friendly and adaptable single gen-set controller engineered for stand-by and prime power applications. Its connectivity and communication features empower remote monitoring, allowing you to oversee your sites from anywhere at any time.
InteliLite 4 AMF 9 Single Gen-Set Controller
Key Features
User-friendly and easily configurable, the InteliLite 4 AMF 9 delivers secure and adaptable control for single gen-sets in both stand-by and prime power applications. With advanced connectivity and communication features, this product facilitates real-time site monitoring from anywhere.
Smartphones & Tablets
Genuine and Brand New Volvo Engine Control Module Ecm, ECU
Volvo Penta ECU (Engine Control Unit) is an important part of the generator engine using diesel. To make it easier to understand and visualize, you can understand that the ECU is the black box part, which is like a “brain” that can receive information, control, and record the activities of the generator engine.
Today, modern society is developing more and more, the demand for good and optimal engine selection is also increasing, leading to many brands being born. However, to achieve the most performance and stability in the manufacturing process, ECU engines usually dominate. Volvo Penta ECU is one of the oldest and best brands in the world in the field of industrial engine production.
Mebay DC30D Newly Porduced Engine Controller Generator Controller
Summary
This Controller Series is specialized for small diesel, gasoline, gas generator sets’start, stop,monitor and defaults checking as well as parameters setting. The controller has a point array LCD screen, can display various faults in the same time that the genset will be stopped once it can not work smoothly. There are Chinese/English interface options, more language can be set according to user’s request. All the parameters can be configured through the front face buttons or use programmable interface by USB to adjust via PC. It can be widely applied for all kinds of auto control system of gensets.
MeBay DC42D MK3 Generator Set Controller Module Diesel
Summary
This series controller is specialized for Diesel / Gasoline / Gas Genset Start, Stop, Parameters monitoring, faults-checking as well as data setting. 3.0 inch LCD screen display with brand new UI design is adapted in this controller that the relative failures can be displayed directly. All the parameters can be displayed by simulated indicators and words. Besides, LCD screen can display various faults in the same time that the genset will be stopped once it can’t work smoothly. There are Chinese/English interface options, more language can be set according to user’s request. All the parameters can be configured through the front face buttons or use programmable interface by RS485 or USB to adjust via PC. It can be widely applied for all kinds of auto control system of gensets.
Meybay DC50D MK3 Genset Controllers for Generator
Summary
This series controller is specialized for Diesel / Gasoline / Gas Genset Start, Stop, Parameters monitoring, faults-checking as well as data setting. 3.5 inch LCD screen display with brand new UI design is adapted in this controller that the relative failures can be displayed directly. All the parameters can be displayed by simulated indicators and words. Besides, LCD screen can display various faults in the same time that the genset will be stopped once it can’t work smoothly. There are Chinese/English interface options, more language can be set according to user’s request. All the parameters can be configured through the front face buttons or use programmable interface by RS485 or USB to adjust via PC. It can be widely applied for all kinds of auto control system of gensets.
Mebay DC70D Amf Auto Start Diesel Generator Controller
Main Features
Mebay DC72D Amf Auto Start Diesel Generator Controller
Main Features
Mebay Generator Controller DC90d Auto Control Module
Mebay Generator Controller DC92D Genset Control Module With CAN Port J1939 Protocol
Mebay Generator Controller DC92D Genset Control Module With CAN Port J1939 Protocol
3. USB Port and Standard CAN communication port, built-in J1939 protocol, has matched more than 30 kinds of engines
4. Real time clock inside, Three class protection countdown function, and the black box function
InteliLite 4 AMF 8 Single Gen-Set Controller
Key features include:
Discover a new level of control and efficiency with InteliLite 4 AMF 8.
Introducing the InteliLite 4 AMF 8, a user-friendly and adaptable single gen-set controller engineered for stand-by and prime power applications. Its connectivity and communication features empower remote monitoring, allowing you to oversee your sites from anywhere at any time.
InteliLite 4 AMF 9 Single Gen-Set Controller
Key Features
User-friendly and easily configurable, the InteliLite 4 AMF 9 delivers secure and adaptable control for single gen-sets in both stand-by and prime power applications. With advanced connectivity and communication features, this product facilitates real-time site monitoring from anywhere.
